WMagnet

Product

Details

Name: WMagnet
Category: Motor WEG

Description

WMagnet motors are synchronous motors with permanent high performance magnets inside their rotor resulting in differentiated characteristics. The WMagnet Line offers more horsepower per frame size, wide range of torque with constant torque without the need for forced ventilation and higher lifespan. WEG technology provides greater efficiency, quality and saving for the industry.

Features of WMagnet IR5 Ultra Premium Motors

Efficiency IR5* Super Premium
Degree of Protection: IP55 - IPW66 (optional)
Output: 3 up to 630kW
Frame: 132S up to 450J/H
Speed: 1000, 1500 and 3000 rpm
Voltage: 400 V
Bearing seal: V’Ring (frames 132S up to 200L), WSeal (from frame size 225S/M to 355M/L) and Taconite labyrint with slinger (for frames 315H/G, 355J/H, 400L/K and up)
Insulation Class “F” (ΔT 80ºK)
Service factor: 1.00
Thermal protection PTC and PT-100
Mounting: B3T
Selfventilated
Color: Gray 091A.3145
Started by frequency converter CFW-11

* The IR5 Efficiency level yield is not defined by the standard being a reference for WEG motors which have approximately 20% reduction in losses against the line Super Premium IR4.

Characteristics of the CFW11 Inverter

Power supply: 5 up to 250 cv
Voltage: 380 up to 480 V
Sensorless vector control: it allows the CFW11 to control the speed motor from zero up to its rated speed
Remote Operating Interface (HMI) with backlight, soft keys, graphic display and real time clock.
Inductors incorporated on the DC Link to improve harmonic mitigation
Communication protocol and accessories: Profi bus, DeviceNet, CANopen, Ethernet / IP, Modbus-RTU and Profi net
IP54 available as optional item up to 100A (55 kW)
Adaptable to all kinds of load
USB port
Flash memory

Permanent Magnets

The WMagnet utilises powerful permanent magnets made from a combination of neodymium, iron and boron (NdFeB), and commonly referred to as rare-earths magnets. These magnets are some eighteen times stronger than traditional Ferrite Magnets. In order to provide superior mechanical strength and corrosion resistance, the Neodymium/Iron/Boron magnets are covered with a protective epoxy coating.

Thermal Protection

WMagnet motors have PTC (Positive Temperature Coefficient) thermistors embedded in their windings which offer full protection against overheating produced by phase loss, overload and under or overvoltage.

Endshields / Lubrication

The WMagnet motors are equipped with bearings offering an L10 life of up to 100,000 hours. All motors feature open bearings and endshields with grease nipples which permit re-lubrication lubrication and consequently a reduction in stoppages for maintenance.

Bearings

As WMagnet motors are supplied with long-life bearings, the maximum permissible radial loads differ from those of general purpose induction motors, as shown in the following table. Axial loads are as per W22 general purpose induction motors on horizontal application. For vertical application, please consult WEG.

Maximum radial load – 100,000 hours – Fr (kN)

	1000 rpm	1000 rpm	1500 rpm	1500 rpm	3000 rpm	3000 rpm
Frame	L	L/2	L	L/2	L	L/2
132S	1,4	1,6	0,9	1	0,9	1
132M	1,4	1,6	0,9	1	0,9	1
132M/L	1,4	1,6	0,9	1	0,9	1
160M	1,9	2,1	1,2	1,4	1,2	1,4
160L	1,9	2,1	1,2	1,4	1,2	1,4
180M	2,5	2,8	1,7	1,9	1,7	1,9
180L	2,6	2,8	1,7	1,9	1,7	1,9
200M	3	3,3	2	2,2	2	2,2
200L	3	3,3	2	2,2	2	2,2
225S/M	4,4	4,9	2	2,2	2	2,2
250S/M	4,4	4,8	3	3,3	3	3,3
280S/M	4,4	4,8	2,7	2,9	2,7	2,9
315S/M	4,9	5,4	2,5	2,7	2,5	2,7